Product Description
TX1152
15" Passive Loudspeaker
▪ DH3 1.25 inch (32 mm) Diaphragm, 1 inch (25 mm) Exit Pure Titanium Compression Driver
▪ SMX2151 15 inch (381 mm) LF Transducer with Fully Symmetric Drive
▪ 60° x 40° Rotatable Coverage Pattern ▪ 100 dB Sensitivity, 133 dB Maximum SPL
▪ 500 W Continuous (2000 W Peak) Power Handling
The TX1152 from Electro-Voice is a high power, high sensitivity, 2-way loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in a lightweight package. The TX1152 utilizes the DH3, a high output 1.25 inch titanium compression driver, coupled to a Constant Directivity 60° x 40° horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications. The SMX2151 15 inch woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long term reliability. The TX1152 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping the TX1152 in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six (6) M8 or six (6) 3/8inch threaded points allow a single TX1152 to be suspended in a various positions. The recessed input panel with dual NL4 connector panel keeps the connectors hidden while allowing the TX1152 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Technical specifications
Frequency Response (-3 dB): 55 Hz - 20 kHz1
Frequency Range (-10 dB): 40 Hz - 20 kHz1
Rec. High-Pass Frequency: 40 Hz
Axial Sensitivity: 100 dB (1W/1m)
Max Calculated SPL: 133 dB Horizontial Coverage: 60° or 40°
Horizontial Coverage: 40° or 60°
Power Handling: 500 W Continuous, 2000 W Peak
LF Transducer: SMX2151, 15 in (381 mm) Driver
HF Transducer: DH3, 1.25 in (32 mm) Diaphragm Compression Driver
Crossover Frequency: 1650 Hz
Nominal Impedance: 8 Ohms
Minimum Impedance: 5.6 Ohms
Connectors: (2) Neutrik Speakon NL4’s
Enclosure: Plywood and MDF with EVCoat
Grille: 16 GA Steel, Black Powdercoat, with Rotatable Logo
Suspension: (6) M8 or (6) 3/8-inch Threaded Points - (2) on Each Side and (2) on the Rear of Enclosure Dimensions (H x W x D): 30.6 in x 17.5 in x 17.5 in (776 mm x 446 mm x 446 mm)
Net Weight: 61.2 lb (27.8 kg)
Shipping Weight: 68.7 lb (31.2 kg)
