google-site-verification: googlee5f34d5e40a99beb.html

Additional Information

Site Information

Loading... Please wait...

JBL PRX-715XLF 15" Powered Subwoofer

$1,699.00 $1,149.00 (You save $550.00)

PRX715XLF
56.00 LBS
Free Shipping
PRX715XLF 15" Self-Powered Extended Low Frequency Subwoofer System
 
was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX715XLF performs with extreme efficiency and control.
 
Applications
  • The PRX715XLF extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX715XLF performs with exceptional efficiency and control. The subs are stackable and light-weight ensuring quick set-ups and tear-downs. And due to their rugged construction are perfect for AV rental inventories. With a pole receptacle (that accepts a SS4-BK or SS4-BK24) on the top panel and integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization.
  • The PRX715XLF is a high performance self-powered subwoofer system. The PRX715XLF is comprised of a powerful 2275H Differential Drive® dual voice-coil and magnetic gap, woofer driven by a 1500 Watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability.
  • The amplifier input panel offers stereo inputs with XLR or ¼ inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.

Features

 

  • 131 dB peak SPL
  • 15" Differential Drive® low-frequency driver for low-distortionand higher SPL
  • Efficient Class-D amplifier technology
  • DSP Input limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
  • Integrated stereo pass-thru, with selectable HP filter, and polarity reverse
  • 2 x XLR-¼" combination inputs, with 2 x XLR loop-thru
  • M20 pole receptacle accepts JBLPOLE-GA and JBLPOLE-MA speaker poles.
  • Multiple handles with comfort rubber grips for easy transport
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
  • Cloth backed, dent-resistant 16 gauge steel grilles

Specifications

 

Power Rating 1500 W
  AC Power Input 100V - 240V~ 50/60 Hz
  Frequency Range (-10 dB) 37 Hz - 113 Hz
  Frequency Response (±3 dB) 44 Hz – 91 Hz
  Internal Crossover Frequency 100 Hz DSP controlled 48 dB filter slope
  Loop out Crossover Frequency 120 Hz analog 24 dB filter slope
  Maximum SPL 131 dB
  Signal indicators Limit: Yellow LED indicates peak output has been reached and dsp 
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio,
Red indicates system has power but is in a power saving mode and will not
pass audio.
  Dynamic Control (Input) dbx Type IV™ limiter circuit
  Input Impedance 20K Ohms (balanced)
  Polarity normal or reverse polarity
  LF Driver 1 x JBL 2275H 15 in woofer
  Enclosure Rectangular, 18 mm & 25mm, plywood
  Transport 2 x injection molded handles with backing cup
  Finish Obsidian DuraFlex™ finish
  Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
  Input Connectors Two Balanced female XLR/ 1/4" combo connectors
  Output Connectors Two balanced male XLR connectors.
  Dimensions (H x W x D) 547.1 mm x 445.0 mm x 580.0 mm
(21.54 in x 17.52 in x 22.48 in)
  Net Weight 25.4 kg (56 lb.)
 
Write Review

This product hasn't received any reviews yet. Be the first to review this product!