Additional Information

Site Information

Loading... Please wait...

Rane CP66 Commercial Processor

$1,699.99

CP66PROCESSOR
12.00 LBS
Free Shipping

CP66 Commercial Processor

 

The Rane CP66 is a multiple-input Commercial Zone Processor with paging support. Designed for versatility, it is perfect for use in restaurants, bars, offices, retail stores, stadiums, and other types of multi-zone environments.

With six Program inputs, six linkable Zone outputs, Page input, and support for the Rane PAGER2, DR1, and DR3 Digital Remotes, a multitude of system configurations are possible.

The CP66 can be configured entirely using its intuitive front panel controls, and easily set up by a technician in any location without a computer. Included Windows® software (connected through USB) provides the additional ability to save and load preconfigured settings for easy deployment, and also allows custom Zone and Group naming.

Any of the six Program inputs can be assigned to each Zone. Program Input 6 can act optionally as a gated Priority Input for use with a jukebox or notification system.

Each Zone features independent settings for:
• Level • 3-Band EQ • Source Select • Page Level
• Ducker Depth • High-Pass Filter • Limiter Threshold • Priority input Enable

CP 66 Processing

Page inputs are priority controlled, so a high priority input will always override the other. If Page priorities are equal, then both can be used simultaneously.

Page 1 supports an analog line or mic level input with selectable 24 V phantom power, and is assigned to Zones via a rear panel dipswitch.

Page 2 supports the optional Rane PAGER2 paging station, allowing dynamic Zone selection right at the microphone, and can store preset groups for even easier page selection. The PAGER2 connects via a single standard CAT 5 cable. See details via the link at the left. (Mic not included with PAGER2.)

Zones may be linked into groups via rear panel switches. When linked, the Level and Source as well as any connected Remote controls are set to the same value for each Zone in the group. This allows simple but powerful linking scenarios without the need for complicated software.

The Rane Digital Remote DR1 adds remote control of Zone (or linked group) Output Level, optionally limited by configurable max and min values. The DR3 adds Input Source selection along with Level, and can be a Master Level control displaying and controlling all six Zone levels from a single location. Custom Digital Remote display names can be set in the PC software. See details via the links at the left.

Independent Accelerated-Slope™ 3-band tone controls for each zone allow easy intuitive adjustment. The tone controls use 12 dB per octave Linkwitz-Riley filters with a range of ±6 dB.

A dedicated transformer-isolated output delivers any Program input source to music-on-hold in a telephone system.

System security can be enabled from a local or remote switch. Options include full CP66 front panel lockout, allowing only front panel zone control, and remote muting.

The Rane CP66 includes an internal 100-240 VAC power supply and is CSA approved.

Features

  • Six independent and linkable Zones.
  • Six Program Inputs (4 RCA, 2 balanced euroblock).
  • One gated Priority Input.
  • Paging Inputs with Priority assign.
  • Independent EQ, Limiter, Ducker depth, Filter Cutoff, Priority Enable and Page Level per Zone.
  • Music-on-Hold Output (Transformer isolated).
  • Front Panel lockout switch.

 

PAGER2 Paging Remote

PAGER2 Paging Station

The PAGER2 is a Smart Paging Station that allows advanced features beyond a normal analog microphone. Specific to the CP66, this unit lets you decide which combination of the six Zones to Page into and displays important information such as whether or not a higher priority page is already occurring.

The PAGER2 accepts any standard gooseneck mic and has built-in selectable 24 V Phantom Power and a 13 dB pad. It normally sits on a desk or table, and has lockdown features for security. It connects to and is powered by the CP66 via shielded CAT 5 cable up to 500 feet (152 meters). Status indicators on the rear of PAGER2 and the CP66 verify communication.

PAGER2 rear panel

The PAGER2 chassis is painted steel, measuring 4.5" x 6" x 2" (11.4 x 15.2 x 5.1 cm). Unit weight is 20 ounces (567 grams).

A gooseneck mic is not included.

Labels for custom Zone and Group names may be inserted in slots on the sides of the protective Lexan faceplate. The PDF from the link below allows you to print your own custom PAGER2 labels. Just fill in the fields, click "Print Form," cut to fit, and insert the labels. Acrobat or Adobe Reader 7 and higher is required.

 

Specifications

 

Parameter Specification Limit Units Conditions/Comments Program Inputs 1-4 ..........

Input Type RCA Unbalanced; Mono-summed L & R ..........

Max Input Level +14.3 +2 /-1 dBu Equivalent to 4.0 Vrms ..........

Input Level Adjust Off to 0 dB ..........

Frequency Response 20 Hz to 22 kHz ±0.4 dB +0 dBu, 20 Hz to 20 kHz ..........

Input Impedance 17.3k 10% Ω

Program Inputs 5-6 ..........

Input Type Euroblock Balanced; Mono-summed L & R ..........

Max Input Level +20 +2 /-1 dBu ..........

Input Level Adjust Off to 0 dB ..........

Frequency Response 20 Hz to 22 kHz ±0.4 dB +0 dBu, 20 Hz to 20 kHz ..........

Input Impedance 14.0k 10% Ω Page 1 Input ..........

Input Type Euroblock Balanced ..........

Gain Range -41 to 0 dBFS

Continuously adjustable .....

Input Mode: Line ..........

Input Impedance 5.8k 10% Ω ..........

Max Input Level +20 dBu Gain set to min. .....

Input Mode: Mic ..........

Input Impedance 1.1k 10% Ω ..........

Max Input Level +5 dBu Gain set to min. ..........

Phantom Power 24 +4 /-0 V 10 mA max.

Zone Outputs ..........Number of Outputs 6 Mono ..........Output Type Euroblock dB Balanced ..........

Max Output Level +20 ±1 dBu ..........3-band

Tone Controls ±6 dB Accelerated-Slope ...............

Low/Mid Frequency 300 Hz 12 dB per octave Linkwitz-Riley ...............

Mid/High Frequency 4 kHz 12 dB per octave Linkwitz-Riley ..........

Frequency Response 20 Hz to 22 kHz +0 /-3 dB ..........

THD +N 0.06 0.01 % +4 dBu, BW=22 kHz ..........

Output Impedance 100 10% Ω Each leg Unit ..........

Conformity CE, FCC, CCSAUS ..........

Universal Line Voltage 100-240 VAC, 50/60 Hz 20 watts ..........

Construction All Steel ..........

Size 3.5"H x 19"W x 8.5"D 2U (8.9 cm x 48.3 cm x 21.6 cm) ..........

Weight 7 lb (3.2 kg) .....

Shipping: Size 4.5" x 20.3" x 13.75" (11.4 cm x 52 cm x 35 cm) ..........

Weight 12 lb (5.4 kg)

Note: 0 dBu = 0.775 Vrms SIG / OL LEVEL OFF -40/+10 SELECTOR PGM 6 AUTO-DETECT PAGE BUS PAGE LEVEL AND DUCKER L/R SUM INPUTS 1-6 SIG / OL LEVEL OFF -40/+10 3-BAND EQ HIGH-PASS FILTER 20-120 Hz LIMITER Q-PEAK ZONE 1-6 + – Program Input to Zone Output Block Diagram Data Sheet-3 CP66 COMMERCIAL

Accessories

  • Optional PAGER2 Smart Paging Station with Mic input.
  • Optional DR1 Remote Zone/Group Level control.
  • Optional DR3 Remote Zone/Group Input Select or Master Level.

CP66 Commercial Processor Overview 03:33

Steve Macatee at Rane Corporation describes features of the new CP66 for background music and paging applications, along with its customizable remote controls and paging station.

  • CP66 Commercia...
    Steve Macatee at Rane Corporation describes features of the ne...
Write Review

This product hasn't received any reviews yet. Be the first to review this product!