Product Description
L1300FD
DSP POWER AMPLIFIER 2X650W
- Live performance DSP amplifier
- Fully integrated professional speaker processing with FIR Drive technology
- Market leading acoustic performance and rock solid reliability
- True 2 ohm stability
- Intuitive system control software, makes setup and control easy
| Load Impedance | 2Ω 2.6Ω 4Ω 8Ω |
| Maximum Output Power, SIngle Channel | 2Ω=1100W; 2.6Ω =950W; 4Ω=660W; 8Ω=350W |
| Maximum Output Power, Dual Channel | 2Ω=1000W; 2.6Ω =850W; 4Ω=600W; 8Ω=320W |
SPECIFICATIONS |
|
| Maximum Output Power, Bridged | 4Ω=2000W; 8Ω=1200W |
| Maximum RMS Voltage Swing, THD = 1%, 1kHz | 55.3 V |
| Voltage Gain ref.1kHz | 32.0dB |
| IMD-SMPTE, 60 Hz, 7 kHz | < 0.1% |
| DIM 30 | < 0.05% (3.15 kHz, 15 kHz) |
| Maximum Input Level | +21 dBu |
| Crosstalk | < -80dB (ref. 1 kHz, at 100 W/4 Ω) |
| Frequency Response | 10 Hz to 21 kHz (±1 dB) |
| Input Impedance, active balanced | 20kΩ |
| Signal-to-Noise Ratio (A-weighted) | >104dB |
| Output Noise , A-weighted | < -68 dBu |
| Output Stage Topology | Class AB |
| Power Requirement | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) |
| Power Consumption | 550 W (â…› Maximum Output Power @4Ω) |
| Protection | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay |
| Cooling | Front-to-rear, 3-stage-fans |
| Safety Class | I |
| Available Color | Black |
| Height | 3.46" (88mm) |
| Width | 19.02" (483mm) |
| Depth | 18.2" (462.4mm) |
| Weight Net | 28.44lbs (12.9kg) |
| Signal Processing | FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance |
| Mains Fuse | 240 V/230 V: T10AH; 120 V/100 V: T20AH |
| Operating Temperature Range | +5°C to +40°C (40°F to +105°F) |
| Total Harmonic Distortion | < 0.05% (at 450 W/4 Ω MBW = 80 kHz, 1 kHz) |
Warranty Information
3 Year Limited Warranty
