JBL Control 25-1 Indoor &Outdoor 70V/100V Speaker (Available In White Or Black)

JBL Control 25-1 Indoor &Outdoor 70V/100V Speaker (Available In White Or Black)

Write a Review
SKU:
CONTROL25-1
Availability:
In Stock
MSRP: $469.99
Price: $319.99
You save 31%
Free Shipping Most orders ship within 24 Hours
Question? Contact Us.

Product Description

Control 25-1

Compact Indoor/Outdoor
Background/Foreground Speaker

The Control® 25-1 is a two-way 5” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

 

Features

  • Components:
    • 5-¼” woofer with woven fiberglass cone
    • 3/4” PEI diaphragm tweeter with fluid cooling
  • Contemporary, high-design appearance
  • Built-in InvisiBall® mounting hardware*, plus available U-bracket
  • Weather resistant enclosure and transducers
  • Wide 100° x 100° coverage
  • 100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
  • High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

Specifications

Frequency Range (-10 dB) 60 Hz to 20 kHz
  Frequency Response (+/-3 dB) 85Hz - 17 kHz
  Power Rating 200 W Continuous Program (2 hrs) 
100 W (400W peak), Continuous Pink Noise (2 hrs) 
75 W (300W peak) Continuous Pink Noise (100 hrs)
  Maximum Input Voltage 25.3 V RMS (2 hrs), 50.6 V peak
  Maximum SPL 110 dB ave. Continuous Pink Noise (116 dB peak)
  Sensitivity 90 dB, 1W/1m (ave. 100 Hz – 10 kHz)
  Coverage Angle 100° x 100°
  Directivity Factor (Q) 6.04 (averaged 1kHz – 16kHz)
  Directivity Index (DI) 7.6dB (averaged 1kHz – 16kHz)
  Nominal Impedance 8 ohms (THRU setting)
  Crossover Type 2nd order low-pass, 3rd order high-pass
  Transformer Taps 70V: 30W, 15W, 7.5W, 3.7W 
100V: 30W, 15W, 7.5W 
Insertion Loss <0.94 dB at any tap setting 
Thru Setting: 8Ω nominal
  Recommended Protective
High-Pass
60 Hz high-pass (24 dB/oct) (for 8Ω operation and for all 70V/100V taps settings).
  Low Frequency Driver 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
  High Frequency Driver 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
  Enclosure Material High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
  Grille Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
  Installation InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
  Environmental IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
  Termination Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
  Agency Rating ROHS-compliant; Transformer UL Recognized per UL1876
  Colors Black (RAL9004) or white (-WH, RAL9016)
  Dimensions (H x W x D) 243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.
  Net Weight 3.4 kg (7.5 lbs)
  Shipping Weight 8.16 kg (18 lbs) for the pair-pack (for 2 speakers)
  Included Accessories InvisiBall™ wall-mounting system), 6 mm x 100 mm hex key
  Optional Accessories MTC-25UB-1 – Yolk-type U-bracket (&-WH) 
MTC-25WMG-1 – WeatherMax grille with backing (&-WH) 
MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)
SKU:
CONTROL25-1
Weight:
8.00 LBS
Width:
7.00 (in)
Height:
10.00 (in)
Depth:
6.00 (in)
Shipping:
Free Shipping

Customers Also Viewed

EZ-Variance Kit Online

EZ Variance Kit Throughout the history of entertainment laser projectors, the FDA variance process has discouraged many from starting to use high powered lasers due to its complexity and long...
MSRP: $99.00
Price: $49.00
Quick view